Presentations -
-
Evaluation of an Ultrasonic Motor using Titanium for Sample Spinning in High Magnetic Field
Marie Obayashi, Taiahiro Yano, Takefumi Kanda, Shuichi Wakimoto, Kiyonori Takegoshi, Tatsuya Matsunaga
International Workshop on Piezoelectric Materials and Applications in Actuators (IWPMA2018) 2018
-
Development of a thin pneumatic rubber actuator generation 3-DOF motion - Design using FEM analysis and fabrication of an actuator -
M. Yuzaki, K. Iwata, S. Wakimoto, T. Kanda
16th International Conference on New Aucutators (ACTUATOR2018) 2018
-
A Small Three-way Hydraulic Valve Using Particle Excitation Controlled by One Piezoelectric Transducer
T. Kanda, H. Osaki, N. Seno, S. Wakimoto, T. Ukida, K. Suzumori, H. Nabae
16th International Conference on New Aucutators (ACTUATOR2018) 2018
-
A McKibben artificial muscle with variable contractuin characteristics by SMP material
Shigeyoshi Yahara, Shuichi Wakimoto, Takefumi Kanda
International Workshop on Piezoelectric Materials and Applications in Actuators (IWPMA2018) 2018
-
Micro droplets generation in a flowin continuous liqhui using an ultrasonic transducer
Nozomu Fujimoto, Takuji Murakami, Kota Mori, Tomoyasu Yamada, Takefumi Kanda, Koichi Suzumori
The Third International Conference on Manipulation, Automation, and Robotics at Small Scales (MARSS2018) 2018
-
Development of Pneumatic Valves adn a Fiber Sensor for a Smart Artificial Muscle
K. Omura, K. Goto, S. Wakimoto, T. Kanda
16th International Conference on New Aucutators (ACTUATOR2018) 2018
-
Fundamental design of a myoelectric prosthesis hand for children using pneumatic artificial muscles
Koyo ASANO, Nobuo TAKEMOTO, Hironari TANIGUCHI, Shuichi WAKIMOTO, Kosuke MORINAGA, Takefumi KANDA
International Workshop on Piezoelectric Materials and Applications in Actuators (IWPMA2018) 2018
-
Design and Assessment of Phononic Crystals for Ultrasonic Wave via Optical Measurement Method International conference
Kensuke Manabe, Atsushi Ishikawa, Ken Yamamoto, Takefumi Kanda, Kenji Tsuruta
2018 IEEE International Ultrasonic Symposium (IUS2018) 2018
-
超音波ねじり振動子と微笑孔板による液滴を用いたナノ粒子生成条件の検討
藤本望夢, 勝田将矢, 神田岳文, 脇元修一, 阪田祐作, 山田嘉昭, 妹尾典久, 中崎義晃, 音山貴史
第30回「電磁力関連のダイナミクス」シンポジウム 2018
-
細径McKibben型人工筋を使用した小児用義手の設計
浅野皓洋, 竹本薫生, 谷口浩成, 脇元修一, 森永浩介, 神田岳文
ロボティクス・メカトロニクス講演会2018 2018
-
車椅子転落防止用ウェアラブル装置の開発
石田莞, 脇元修一, 上田剛慈, 神田岳文
ロボティクス・メカトロニクス講演会2018 2018
-
単一の圧電振動子によって駆動する微粒子励振型三方弁の特性評価
山本陽光, 神田岳文, 尾﨑隼人, 脇元修一, 橋本航, 髙見春人, 妹尾典久, 鈴森康一, 浮田貴宏, 難波江裕之
2018年度精密工学会秋季大会 2018
-
2液3相構造のマイクロ流路による液滴を用いたナノ粒子生成システムの試作
藤本望夢, 神田岳文, 阪田祐作, 妹尾典久, 脇元修一, 中崎義晃, 音山貴史
平成30年度電気学会センサ・マイクロマシン部門総合研究会 2018
-
超音波ねじり振動を利用したマイクロミキサの試作および混合性能の評価
針田和樹, 三宅星連, 神田岳文, 脇元修一, 妹尾典久, 川崎慎一朗
2018年度精密工学会秋季大会 2018
-
マイクロリアクタによる微小液滴を用いたナノ粒子生成
藤本望夢, 勝田将矢, 神田岳文, 脇元修一, 阪田祐作, 山田嘉昭, 妹尾典久, 中崎義晃, 音山貴史
ロボティクス・メカトロニクス講演会2018 2018
-
空圧・水圧駆動が可能なアクチュエータシステムによる柔軟脚構造の提案
小川草太, 脇元修一, 神田岳文
ロボティクス・メカトロニクス講演会2018 2018
-
単一の圧電振動子により駆動する微粒子励振型三方弁の試作
尾﨑隼人, 神田岳文, 脇元修一, 橋本航, 山本陽光, 妹尾典久, 鈴森康一, 浮田貴宏, 難波江裕之
ロボティクス・メカトロニクス講演会2018 2018
-
圧電振動子による極低温用バルブの試作とソフトアクチュエータの駆動
山田大貴, 神田岳文, 脇元修一, 山口大介
ロボティクス・メカトロニクス講演会2018 2018
-
Design of powered upper limb prosthesis for children using small diameter McKibben type artificioal muscle
The Robotics and Mechatoronica Coference 2018(ROBOMEC2018) 2018
-
Development of a Fall Preventive Wearable Device for Wheel Chair
The Robotics and Mechatoronica Coference 2018(ROBOMEC2018) 2018