研究者詳細 - 植田　浩史

MISC - 植田　浩史

分割表示 564 件中 141 - 160 件目／全件表示 >>

高強度小型多機能スケルトンサイクロトロンの開発―超電導コイル設計―

野口聡, 植田浩史, 石山敦士, 渡部智則, 長屋重夫, 吉田潤, 鶴留武尚, 高橋伸明, 三上行雄, 福田光宏

低温工学・超電導学会講演概要集 96th 79 2018年5月

高強度小型多機能スケルトンサイクロトロンの開発―全体概要―

福田光宏, 石山敦士, 植田浩史, 野口聡, 渡部智則, 長屋重夫, 吉田潤, 鶴留武尚, 高橋伸明, 三上行雄

低温工学・超電導学会講演概要集 96th 51 2018年5月

9.4T‐MRIにおけるREBCO線材の細線化による遮蔽電流磁場への影響の解析

稲垣善太, 伊東慶太, 小曽根裕一, 石山敦士, 植田浩史, 野口聡

電気学会全国大会講演論文集(CD-ROM) 2018 ROMBUNNO.5‐161 2018年3月

サイクロトロン用高温超電導マグネットの遮蔽電流磁場評価

粟津佑太, KIM Seok Beom, 植田浩史, 野口聡, 石山敦士, 渡部智則, 長屋重夫, 吉田潤, 鶴留武尚, 高橋伸明, 三上行雄, 福田光宏

電気学会全国大会講演論文集(CD-ROM) 2018 ROMBUNNO.5‐160 2018年3月

医薬用タンパク質の高勾配磁気分離用磁性フィルターの断面形状設計

安部拓郎, 窪田幹久, 森優輝, KIM SeokBeom, 植田浩史

電気・情報関連学会中国支部連合大会講演論文集(CD-ROM) 69th 2018年

医薬用タンパク質の高勾配磁気分離用磁性フィルターの周囲の磁性粒子の挙動解析

森優輝, 窪田幹久, KIM Seok Beom, 植田浩史

電気学会全国大会講演論文集(CD-ROM) 2018 2018年

500MHz LTS/REBCO NMRの遮蔽電流磁場解析

盛川瑛亮, 小泉智暉, KIM SeokBeom, 植田浩史, 濱田衞, 柳澤吉紀, 前田秀明

低温工学・超電導学会講演概要集 96th 2018年

500MHz LTS/REBCO NMRにおける遮蔽電流磁場解析による磁場均一度評価

盛川瑛亮, 徳永佳祐, 小泉智暉, KIM SeokBeom, 植田浩史, 柳澤吉紀

低温工学・超電導学会講演概要集 97th 2018年

高温超電導コイルの巻線内電磁力解析

植田浩史, 徳永佳祐, 盛川瑛亮, 小泉智暉, KIM SeokBeom

低温工学・超電導学会講演概要集 97th 2018年

REBCOコイルの遮蔽電流に起因する巻線内電磁力解析

徳永佳祐, 盛川瑛亮, 小泉智暉, KIM SeokBeom, 植田浩史

電気・情報関連学会中国支部連合大会講演論文集(CD-ROM) 69th 2018年

高勾配磁気分離を利用した医薬用タンパク質精製装置の開発

植田浩史

岡山工学振興会ニュース ( 111 ) 2018年

マルチフィラメント高温超電導線材で巻線された高温超電導コイルの結合電流解析

植田浩史, 小泉智暉, 盛川瑛亮, KIM SeokBeom

電気学会研究会資料 ( MC-18-001-023/ASC-18-001-023 ) 2018年

高温超電導コイルの小型化とインダクタンス制御に関する研究

西川大亮, 立田貴裕, 大草晴義, KIM SeokBeom, 植田浩史

電気・情報関連学会中国支部連合大会講演論文集(CD-ROM) 69th 2018年

単板磁気試験器を用いた電磁鋼板の2Hコイル法による磁界強度測定法の検討

太田葵, 藤本賢哉, 大原慎也, 植田浩史, KIM SeokBeom

電気・情報関連学会中国支部連合大会講演論文集(CD-ROM) 69th 2018年

Halbach配列の永久磁石によるシリンダ形状マグネットの磁場均一度向上に関する研究

廣瀬瞭, 喜来雅人, 富坂良和, 石井翔己, 小谷健斗, 植田浩史, KIM Seok Beom

電気・情報関連学会中国支部連合大会講演論文集(CD-ROM) 69th 2018年

A new thin approximation simulation method of screening current in REBCO tape considering tape's thickness

S. Noguchi, A. Ishiyama, H. Ueda

2017 IEEE International Magnetics Conference, INTERMAG 2017 2017年8月

Study on the Rotation Properties and the Design Issue of Non-Contact Rotating System Using HTS Bulks and Permanent Magnets

R. Okamura, S. B. Kim, Y. Ozaki, H. Ueda

Journal of Physics: Conference Series 871 ( 1 ) 702 - 709 2017年7月

記述言語：英語出版者・発行元：Institute of Physics Publishing

In previous study, non-contact rotating system consisting of the ring-shaped high temperature superconducting (HTS) bulks, ring-shaped permanent magnets (PMs) and stator coil was proposed. In this system, HTS bulks were magnetized by PMs and PMs were levitated with strong restoring force. In our previous study, we have constructed the rotating system with the ring-shaped HTS bulks with ID 20 mm, OD 60 mm, and 15-mm thickness. However, since these bulks costs too much, we switched to use HTS bulks with ID 20 mm, OD 60 mm, and 5-mm-thickness to miniaturize the system. However, this system have potential to fail the radial stability of rotating shaft. Therefore, we focused on the rotating and the radial restoring force in terms of the stability of the rotating shaft in the rotating system with 5-mm thickness HTS bulks.

DOI： 10.1088/1742-6596/871/1/012096

Scopus

researchmap

Numerical study to obtain the improved field homogeneity of HTS bulk magnet with enlarged inner diameter for compact NMR

S. Fukada, S. B. Kim, T. Nakagawa, R. Nomura, H. Ueda

Journal of Physics: Conference Series 871 ( 1 ) 1488 - 1495 2017年7月

記述言語：英語出版者・発行元：Institute of Physics Publishing

The strength and homogeneity of the magnetic field required for NMR relaxometry device are 1.5 T and 150 ppm/cm3 respectively. It is relatively easy to generate the trapped magnetic field over 1.5 T at 77.4 K using the stacked HTS bulks, and 150 ppm/cm3 field homogeneity was obtained using the fabricated field compensation methods on HTS bulks magnet with 20 mm inner diameter. However, it is still hard to obtain 150 ppm/cm3 field homogeneity without field compensation methods. In this paper, in order to improve the trapped magnetic field homogeneity, the HTS bulk magnet with enlarged inner diameter was proposed and studied as the functions of size and shape of HTS bulk. The analytical study based on FEM was carried out to optimize the shape of HTS bulk magnet with enlarged inner diameter.

DOI： 10.1088/1742-6596/871/1/012088

Scopus

researchmap

Fundamental study on the magnetic field control method using multiple HTS coils for Magnetic Drug Delivery System

R. Hirano, S. B. Kim, T. Nakagawa, Y. Tomisaka, H. Ueda

Journal of Physics: Conference Series 871 ( 1 ) 969 - 976 2017年7月

記述言語：英語出版者・発行元：Institute of Physics Publishing

The magnetic drug delivery system (MDDS) is a key technology to reduce the side effects in the medical applications, and the magnetic force control is very important issue in MDDS. In this application, the strength of magnetic field and gradient required to MDDS devices are 54 mT and 5.5 T/m, respectively. We proposed the new magnetic force control system that consists of the multiple racetrack HTS magnets. We can control the magnetic field gradient along the longitudinal direction by the arrangement of the multiple racetrack HTS magnets and operating current of each magnet. When the racetrack HTS magnets were used, the critical current was reduced by the self-magnetic field. Therefore, the shape design of HTS magnet to reduce the magnet field into the surface of HTS tapes was required. Therefore, the electromagnetic analysis based on finite element method (FEM) was carried out to design and optimize the shape of multiple racetrack HTS magnet. We were able to suppress the reduction of critical current by placing the magnetic substance at upper and lower side of the HTS magnets. It was confirmed that obtained maximum values of magnetic field strength and field gradient were 33 mT and 0.18 T/m, respectively.

DOI： 10.1088/1742-6596/871/1/012104

Scopus

researchmap

高磁場コイルシステムの研究開発 ―高磁場MRI用高温超電導磁石の開発― 招待査読

宮﨑寛史, 岩井貞憲, 戸坂泰造, 野村俊自, 来栖努, 植田浩史, 野口聡, 石山敦士, 浦山慎一, 福山秀直

低温工学 52 ( 4 ) 224 - 233 2017年7月

記述言語：日本語掲載種別：記事・総説・解説・論説等（学術雑誌）出版者・発行元：公益社団法人低温工学・超電導学会 (旧社団法人低温工学協会)

<p>A project for developing of RE₁Ba₂Cu₃O_7-δ (REBCO) magnets to be utilized in ultrahigh-field magnetic resonance imaging (MRI) was started in 2013. Our final targets are 9.4 T MRI systems for whole-body and brain imaging. In this project, two different development approaches towards the final target were planned. One is a small REBCO coil that can generate 10 Tclass magnetic fields, which is the same level as the target magnetic field. The other is a conduction-cooled 1.5 T REBCO MRI magnet that has a room-temperature bore of 396 mm, which is as large as those of mid-sized model magnets. These results were reflected in the design of a conduction-cooled 9.4 T REBCO magnet for whole-body MRI systems.</p>

DOI： 10.2221/jcsj.52.224

<植田 浩史>

MISC - 植田 浩史

<植田　浩史>

MISC - 植田　浩史