Associate Professor,Yamaguchi University

1997 - 2003

Yamaguchi University   Faculty of Engineering

1997 - 2003

Assistant Professor,Kyoto University

1989 - 1997

Kyoto University   Faculty of Engineering

1989 - 1997

日本エアロゾル学会

新エネルギー・産業技術総合開発機構   NEDO技術委員  

2020.4   

日本作業環境測定協会   理事  

2020.4   

化学工学会 粒子・流体プロセス部会   監事  

2020.4 - 2022.3   

日本粉体工業技術協会標準粉体委員会   副委員長  

2018.4   

日本粉体工業技術協会計装測定分科会   副コーディネーター  

2017.4   

日本粉体工業技術協会   産学技術交流推進部門マネージャー  

2012.4   

日本粉体工業技術協会湿式プロセス分科会   副コーディネーター  

2011.4 - 2017.3   

岡山労働局   粉じん対策指導委員  

2010.4   

日本エアロゾル学会   第46回エアロゾル科学技術研究討論会実行委員長  

2009   

化学工学会岡山地区化学工学化学工学懇話会   常任幹事  

2007.4   

粉体工学会   理事、副会長、企画委員長  

2007.1 - 2023.3   

日本化学会中国四国支部   地区幹事  

2005 - 2006   

Direct numerical simulation of permeation of particles through a realistic fibrous filter obtained from X-ray computed tomography images utilizing signed distance function

Mohammad Irwan Fatkhur Rozy, Yuto Maemoto, Masaki Ueda, Tomonori Fukasawa, Toru Ishigami, Kunihiro Fukui, Mikio Sakai, Yasushi Mino, Kuniaki Gotoh

Powder Technology   385   131 - 143   2021.6

Evaluation of Flowability of Wet Granular Materials by Stirring Torque: Effects of Additive Liquid Viscosity on Flowability Reviewed

三野泰志, 新倉丸也, 中曽浩一, 後藤邦彰

粉体工学会誌   58 ( 5 )   234 - 237   2021.5

Development of Chemical Cold Generation System from Unused Thermal Energy Reviewed

中曽浩一, 筒井優衣, 高橋秀和, 三野泰志, 後藤邦彰, 丸岡伸洋, 埜上洋

鉄と鋼   106 ( 8 )   556 - 563   2020.8

Characteristic Capillary Diameter to Evaluate Capillary Pressure of Ordered Particle Structures Based on Simulation of Two-Phase Flow Reviewed

山本知世, 三野泰志, 中曽浩一, 後藤邦彰

粉体工学会誌   57 ( 8 )   417 - 423   2020.8

Numerical Simulation of Wetting Phenomena on Solid Surface Using Free-energy Lattice Boltzmann Method Reviewed

山本知世, 三野泰志, 中曽浩一, 後藤邦彰

粉体工学会誌   56 ( 10 )   550 - 555   2019.10

青色無機顔料コバルトブルーの色調におよぼすコバルト原料化合物の影響 Reviewed

米田 美佳, 辰己 祐哉, 三野 泰志, 中曽 浩一, 後藤 邦彰, 中西 真, 藤井 達生, 小西 康裕, 野村 俊之

粉体工学会誌   56 ( 8 )   446 - 451   2019.8

Solid-state synthesis and characterization of cobalt blue core-shell pigment particles Reviewed

Mika Yoneda, Kuniaki Gotoh, Makoto Nakanishi, Tatsuo Fujii, Yasuhiro Konishi, Toshiyuki Nomura

JOURNAL OF THE AMERICAN CERAMIC SOCIETY   102 ( 6 )   3468 - 3476   2019.6

Influence of surface roughness created by admixing smaller particles on improving discharge particle flowability of main particles Reviewed

Mikio Yoshida, Tatsuki Katayama, Ryota Kikuchi, Jun Oshitani, Kuniaki Gotoh, Atsuko Shimosaka, Yoshiyuki Shirakawa

Advanced Powder Technology   30 ( 1 )   156 - 163   2019.1

Influence of cobalt source compounds on the color tone of cobalt blue inorganic pigment

Mika Yoneda, Yuya Tatsumi, Yasushi Mino, Koichi Nakaso, Kuniaki Gotoh, Makoto Nakanishi, Tatsuo Fujii, Yasuhiro Konishi, Toshiyuki Nomura

Journal of the Society of Powder Technology, Japan   56 ( 8 )   446 - 451   2019

被覆粒子から固相合成したコアシェル構造コバルトブルー顔料の色調におよぼす被覆混合条件の影響 Reviewed

辰巳祐哉, 米田美佳, 三野泰志, 中曽浩一, 後藤邦彰, 野村俊之

粉体工学会誌   55 ( 3 )   165 - 170   2018.3

Influence of aluminum source on the color tone of cobalt blue pigment Reviewed

Mika Yoneda, Kuniaki Gotoh, Makoto Nakanishi, Tatsuo Fujii, Toshiyuki Nomura

Powder Technology   323   574 - 580   2018.1

Effects of main particle diameter on improving particle flowability for compressed packing fraction in a smaller particle admixing system Reviewed

Mikio Yoshida, Atsushi Misumi, Jun Oshitani, Kuniaki Gotoh, Atsuko Shimosaka, Yoshiyuki Shirakawa

ADVANCED POWDER TECHNOLOGY   28 ( 10 )   2542 - 2548   2017.10

Airborne particles released by crushing CNT composites Reviewed

Isamu Ogura, Chihiro Okayama, Mari Kotake, Seisuke Ata, Yasuto Matsui, Kuniaki Gotoh

Journal of Physics: Conference Series   838   2017.7

固気流動層内での密度偏析における最下層への低密度粉体の取り込みの有無 Reviewed

林省吾, 押谷潤, 後藤邦彰

粉体工学会誌   54 ( 2 )   97 - 103   2017.2

DEM simulation and analysis of the effects of adhesive forces and rotations of admixed particles on improving main particle flowability Reviewed

Mikio Yoshida, Ryota Takatsuki, Genta Sakamoto, Jun Oshitani, Kuniaki Gotoh

ADVANCED POWDER TECHNOLOGY   27 ( 5 )   2084 - 2093   2016.9

Evaluation of Particle Adhesiveness Using the Shear Stress Induced by Pulling a Rod across a Compressed Particle Bed Reviewed

Yoshida Mikio, Yokoyama Tatsuya, Oshitani Jun, Gotoh Kuniaki

Journal of the Society of Powder Technology, Japan   53 ( 6 )   386 - 390   2016.6

Enhancement of Particle Removal Performance of High-speed Air Jet by Setting Obstacle in Jet Flow Reviewed

Kuniaki Gotoh, Kenta Mizutani, Yoshiaki Tsubota, Jun Oshitani, Mikio Yoshida, Ken Inenaga

PARTICULATE SCIENCE AND TECHNOLOGY   33 ( 5 )   567 - 571   2015.9

Effects of an adhesive force of admixed particles on compressed packing fractions in a particle bed Reviewed

Yoshida Mikio, Sanagawa Tomoya, Okano Shun-ichiro, Yamamoto Hiroaki, Oshitani Jun, Gotoh Kuniaki, Paul Jonas, Koch Thomas, Peukert Wolfgang

ADVANCED POWDER TECHNOLOGY   26 ( 2 )   626 - 631   2015.3

固相反応法により合成したコバルトブルーの色調に及ぼす原料混合時間と焼成温度の影響 Reviewed

米田美佳, 吉田幹生, 後藤邦彰, 辻広美, 中西真, 藤井達生, 野村俊之

粉体工学会誌   51 ( 9 )   629 - 634   2014.9

プロピル基に表面改質した固体壁とシリカ粒子間の付着力に及ぼす改質条件の影響 Reviewed

吉田幹生, 日高弘喜, 石田尚之, 押谷潤, 後藤邦彰

粉体工学会誌   51 ( 9 )   635 - 640   2014.9

難流動性粒子の流動性評価に向けた新規装置の開発 Reviewed

吉田幹生, 古江奈々子, 押谷潤, 後藤邦彰

化学工学論文集   40 ( 5 )   376 - 381   2014.9

Development of a New Apparatus for Evaluating Flowability of Particle with Poor Flow Behavior Reviewed

Mikio Yoshida, Nanako Furue, Jun Oshitani, Kuniaki Goto

KAGAKU KOGAKU RONBUNSHU   40 ( 5 )   376 - 381   2014

Effects of Filler Mixing Methods on Properties of Polypropylene/Talc/Calcium Carbonate Composite Materials Reviewed

25 ( 9 )   432 - 437   2013.9

Thermal Oxidation Degradation Behavior of Polypropylene Filled with Calcium Carbonate Reviewed

25 ( 7 )   349 - 355   2013.7

Development of Thickener-Modeled Dry Dense Medium Separator for High-Speed and Low-maintenance Separation Reviewed

YOSHIDA Mikio, SHIRAISHI Takafumi, OKAMOTO Kenta, OSHITANI Jun, GOTOH Kuniaki

Chemical engineering   39 ( 3 )   178 - 183   2013.5

Release characteristics of single-wall carbon nanotubes during manufacturing and handling Reviewed

I. Ogura, M. Kotake, N. Hashimoto, K. Gotoh, A. Kishimoto

NANOSAFE 2012: INTERNATIONAL CONFERENCES ON SAFE PRODUCTION AND USE OF NANOMATERIALS   429   012057   2013.4

Effects of the agglomerated states and the gap of coverage for admixed particles on particle-bed packing fractions Reviewed

Yoshida Mikio, Yamamoto Hiroaki, Oshitani Jun, Gotoh Kuniaki

ADVANCED POWDER TECHNOLOGY   24 ( 2 )   560 - 564   2013.3

スクリューフィーダーの粉体供給性能の相関に必要な粉体特性の検討 Reviewed

後藤 邦彰, 高橋 稔尚, 吉田 幹生, 押谷 潤, 赤坂 真吾

粉体工学会誌   49 ( 11 )   810 - 817   2012.11

Influence of air bubble size on float-sink of spheres in a gas-solid fluidized bed Reviewed

Oshitani Jun, Isei Yuhei, Yoshida Mikio, Gotoh Kuniaki, Franks George V

ADVANCED POWDER TECHNOLOGY   23 ( 1 )   120 - 123   2012.1

Improvement of dry float-sink separation of smaller sized spheres by reducing the fluidized bed height Reviewed

Oshitani Jun, Kawahito Tetsuya, Yoshida Mikio, Gotoh Kuniaki, Franks George V

ADVANCED POWDER TECHNOLOGY   23 ( 1 )   27 - 30   2012.1

Rod-shaped Hydroxyapatite Nanoparticle Formation by Maturation with AOT Reviewed

Oshitani Jun, Kataoka Nobuhide, Yoshida Mikio, Gotoh Kuniaki, Imamura Koreyoshi

CHEMISTRY LETTERS   40 ( 10 )   1085 - 1086   2011.10

平板上昇に起因する粉体層からの粒子飛散現象の実験的検討 Reviewed

後藤邦彰, 松田智子, 吉田幹生, 押谷潤, 小倉勇

化学工学論文集   37 ( 4 )   317 - 322   2011.9

Rod-shaped Hydroxyapatite Nanoparticle Formation Using AOT and Water without Oil Reviewed

Jun Oshitani, Nobuhide Kataoka, Mikio Yoshida, Kuniaki Gotoh, Koreyoshi Imamura, Hidekazu Tanaka

CHEMISTRY LETTERS   40 ( 4 )   400 - 401   2011.4

Fluidized Bed Medium Separation (FBMS) using the particles with different hydrophilic and hydrophobic properties Reviewed

Yoshida Mikio, Oshitani Jun, Tani Keiichiro, Gotoh Kuniaki

ADVANCED POWDER TECHNOLOGY   22 ( 1 )   108 - 114   2011.1

The influence of the density of a gas-solid fluidized bed on the dry dense medium separation of lump iron ore Reviewed

Jun Oshitani, Tetsuya Kawahito, Mikio Yoshida, Kuniaki Gotoh, George V. Franks

MINERALS ENGINEERING   24 ( 1 )   70 - 76   2011.1

Experimental Investigation of Particle Resuspension from a Powder Layer Induced by an Ascending Flat Object Reviewed

Gotoh Kuniaki, Matsuda Satoko, Yoshida Mikio, Oshitani Jun, Ogura Isamu

KAGAKU KOGAKU RONBUNSHU   37 ( 4 )   317 - 322   2011

Effect of Diameter Ratio of 2-component Silica Particle on Coagulation State in a Liquid Fluid Field Reviewed

YOSHIDA Mikio, MORIMOTO Makoto, OSHITANI Jun, GOTOH Kuniaki

Journal of the Society of Powder Technology,Japan   47 ( 7 )   458 - 465   2010.7

Difference in Screening Effect of Alkali Metal Counterions on H-AOT-Based W/O Microemulsion Formation Reviewed

Oshitani Jun, Takashina Shiho, Yoshida Mikio, Gotoh Kuniaki

LANGMUIR   26 ( 4 )   2274 - 2278   2010.2

Dry Dense Medium Separation of Aluminum and Non-aluminum in Waste Mixed Metals Using a Gas-Solid Fluidized Bed Reviewed

中務真吾, 山川直也, 図師竜也, 久保泰雄, 吉田幹生, 後藤邦彰, 押谷潤

粉体工学会誌   47 ( 2 )   92 - 97   2010.2

A method for dispersing dry nano-sized particles in a liquid using carrier particles Reviewed

Kuniaki Gotoh, Takashi Kawazu, Mikio Yoshida, Jun Oshitani

ADVANCED POWDER TECHNOLOGY   21 ( 1 )   34 - 40   2010.1

Decrease of Cl contents in waste plastics using a gas-solid fluidized bed separator Reviewed

Mikio Yoshida, Shingo Nakatsukasa, Masaaki Nanba, Kuniaki Gotoh, Tatsuya Zushi, Yasuo Kubo, Jun Oshitani

ADVANCED POWDER TECHNOLOGY   21 ( 1 )   69 - 74   2010.1

Phase behavior and size variation of Na-AOT-based W/O microemulsions by increasing NaOH concentration in the water pool Reviewed

Jun Oshitani, Shiho Takashina, Mikio Yoshida, Kuniaki Gotoh

ADVANCED POWDER TECHNOLOGY   20 ( 6 )   554 - 557   2009.11

Contribution of Na+ counterions to H-AOT&Na-AOT-based W/O microemulsion formation using aqueous NaOH solutions as estimated by pyranine absorbance Reviewed

Jun Oshitani, Shiho Takashina, Mikio Yoshida, Kuniaki Gotoh

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS   350 ( 1-3 )   136 - 140   2009.10

Electroorganic synthesis in oil-in-water (O/W) nanoemulsion: TEMPO-mediated electrooxidation of amphiphilic alcohols in water Reviewed

Manabu Kuroboshi, Tomonori Yoshida, Jun Oshitani, Kuniaki Goto, Hideo Tanaka

TETRAHEDRON   65 ( 34 )   7177 - 7185   2009.8

乾式比重分離装置の分離効率に及ぼす物体投入高さの影響 Reviewed

吉田幹生, 中務真吾, 後藤邦彰, 図師竜也, 久保泰雄, 押谷潤

化学工学論文集   35 ( 3 )   274 - 278   2009.5

Influence of Airflow at the Bottom of a Gas-Solid Fluidized Bed on Float and Sink of Objects Reviewed

NAKATSUKASA Shingo, YAMAKAWA Naoya, ZUSHI Tatsuya, KUBO Yasuo, YOSHIDA Mikio, GOTOH Kuniaki, OSHITANI Jun

Journal of the Research Association of Powder Technology, Japan   46 ( 3 )   56 - 61   2009.3

固気流動層内での物体浮沈に及ぼす粒度偏析と物体投入高さの影響 Reviewed

吉田幹生, 中務真吾, 後藤邦彰, 押谷潤

化学工学論文集   46 ( 3 )   56 - 61   2009.3

粉体表面改質処理による表面自由エネルギー変化が粉体流動性に及ぼす影響

岡野 俊一郎, 吉田 幹生, 押谷 潤, 後藤 邦彰

化学工学会 研究発表講演要旨集   2009   96 - 96   2009

Water Pool pH of AOT-Based W/O Microemulsions at Various Water Contents Estimated by Absorbance Ratio of Pyranine Reviewed

Jun Oshitani, Shiho Takashina, Mikio Yoshida, Kuniaki Gotoh

JOURNAL OF CHEMICAL ENGINEERING OF JAPAN   41 ( 6 )   507 - 512   2008.12

Effect of Target Plate Scanning on the Removal of Adhered Particles by a High-speed Air Jet Reviewed

Okazaki Mineya, Kusumura Reiko, Yoshida Mikio, Oshitani Jun, Gotoh Kuniaki

Journal of the Research Association of Powder Technology, Japan   45 ( 10 )   690 - 696   2008.10

高速気流による表面付着粒子の除去に対するパルスエアの効果 Reviewed

岡崎峰也, 吉田幹生, 押谷潤, 後藤邦彰

粉体工学会誌   45 ( 5 )   294 - 304   2008.5

Phase behavior and size variation of AOT-based W/O microemulsions by substituting H+ for Na+ as the counterion Reviewed

Colloid and Surfaces A: Physicochemical and Engineering Aspects   325   52 - 56   2008.4

Effects of Fe-AOT complex on the properties of iron oxide particles formed by an AOT isooctane/water emulsion system Reviewed

J. Oshitani, I. Hatai, M. Yoshida, K. Gotoh

Asia-Pacific Journal of Chemical Engineering   3 ( 3 )   250 - 254   2008.3

Electroorganic synthesis in oil-in-water nanoemulsion: TEMPO-mediated electrooxidation of amphiphilic alcohols in water Reviewed

Tomonori Yoshida, Manabu Kuroboshi, Jun Oshitani, Kuniaki Gotoh, Hideo Tanaka

SYNLETT   ( 17 )   2691 - 2694   2007.10

Crystallization Conditions of Crystal Agglomerates Suitable for Filtration Separation Reviewed

MUKUTA Takashi, SHIMOJO Yoshitaka, GOTOH Kuniaki

Journal of the Society of Powder Technology,Japan   43 ( 12 )   882 - 889   2006.12

Control of Apparent Specific Gravity in Binary Particle Systems of Gas-Solid Fluidized Bed Reviewed

Yoshida Mikio, Oshitani Jun, Ono Keiko, Ishizashi Miki, Gotoh Kuniaki

Journal of the Research Association of Powder Technology, Japan   43 ( 8 )   567 - 576   2006.8

Fluidized Bed Medium Separation (FBMS) Using Particles with Different Hydrophilic and Hydrophobic Properties Reviewed

Yoshida Mikio, Oshitani Jun, Tani Keiichiro, Gotoh Kuniaki

Journal of the Research Association of Powder Technology, Japan   43 ( 4 )   252 - 259   2006.4

コンクリート廃材リサイクルのためのモルタルと砂利の乾式比重分離 Reviewed

吉田 幹生, 押谷 潤, 奥田一行, 大石浩之, 後藤 邦彰

粉体工学会誌   43   567 - 576   2006.4

Fluidized bed medium separation (FBMS) of Cl-containing plastics in home electric appliance shredder residue Reviewed

Mikio Yoshida, Jun Oshitani, Ken-ichi Kaname, Kuniaki Gotoh

KAGAKU KOGAKU RONBUNSHU   32 ( 2 )   115 - 121   2006.3

家電シュレッダーダストからの塩素含有プラスチックの乾式比重分離 Reviewed

吉田 幹生, 押谷 潤, 要 賢一, 後藤 邦彰

化学工学論文集   32 ( 2 )   115 - 121   2006.3

人工筋肉型アクチュエータＳＭＡ編み構造の力学特性 Reviewed

齊藤俊, Qiongli JI, 後藤邦彰

日本機会学会論文集（Ｃ編）   71 ( 707 )   219 - 225   2005.7

Application of Fluid Penetration Method to Evaluation of Non-uniformity of Particle Bed Structure

Gotoh Kuniaki, Daikoku Tatsuo, Nishimura Tatsuo

Journal of the Research Association of Powder Technology, Japan   42 ( 9 )   613 - 618   2005

Influence of thermal convection on particle behavior in solid-liquid suspensions Reviewed

K Gotoh, S Yamada, T Nishimura

ADVANCED POWDER TECHNOLOGY   15 ( 5 )   499 - 514   2004.9

Effect of Particle Shape on the Reverse Combustion Process of a Packed Bed Reviewed

Yoshiyuki Yamada, Kuniaki Gotoh, Tatsuo Nishimura

Kagaku Kogaku Ronbunshu   29 ( 4 )   500 - 507   2003.7

Comparison between Spherical and Non-spherical Particles in Reverse Combustion Processes of Packed Bed. Reviewed

Yamada Yoshiyuki, Nakamura Yuichi, Gotoh Kuniaki, Nishimura Tatsuo

Journal of the Research Association of Powder Technology, Japan   39 ( 10 )   743 - 750   2002.10

Effect of orientation of chain-like agglomerated particles on pressure drop in solid-liquid flow systems Reviewed

Kuniaki Gotoh, Hiroyuki Watakabe, Tatsuo Nishimura

Nippon Kikai Gakkai Ronbunshu, B Hen/Transactions of the Japan Society of Mechanical Engineers, Part B   68 ( 671 )   2036 - 2041   2002.7

Effect of particle size on the combustion propagation rate of counter combustion in a packed bed Reviewed

Yoshiyuki Yamada, Yuichi Nakamura, Kuniaki Gotoh, Tatsuo Nishimura

Kagaku Kogaku Ronbunshu   28 ( 2 )   227 - 229   2002.3

Development of annular-type virtual impactor Reviewed

K Gotoh, H Masuda

POWDER TECHNOLOGY   118 ( 1-2 )   68 - 78   2001.8

Traveling plumes generated within a double-diffusive interface between counter shear flows Reviewed

T Nishimura, S Sakura, K Gotoh, AM Morega

PHYSICS OF FLUIDS   12 ( 11 )   3078 - 3081   2000.11

Improvement of the Classification Performance of a Roctangular Jet Virtual Impactor Reviewed

Gotoh,K, Masuda,H

32   221 - 232   2000.11

Study on the sample size required for the estimation of mean particle diameter Reviewed

Masuda,H, Gotoh,K

10 ( 2 )   159 - 173   1999.3

Electric charging characteristic of a mixer-type powder disperser Reviewed

Kittipoomwong,P, Maeda,M, Gotoh,K, Masuda,H

9 ( 4 )   317 - 330   1998.7

Removal of Single Particles Adhered on a Flat Surface by Vibrating Air Jet Reviewed

GOTOH Kuniaki, TAKAHASHI Koichi, MASUDA Hiroaki

Earozoru Kenkyu   13 ( 2 )   133 - 141   1998.6

A Study on Size Segregation of Particles Using Distinct Element Analysis

YOSHIDA Jun, GOTOH Kuniaki, MASUDA Hiroaki

Chemical engineering   22 ( 3 )   622 - 628   1996.5

Dry Dispersion of Fine Particles Reviewed

Masuda, H, Gotoh,K

Colloids and Surfaces A. Physicochemical and Engineering Aspects   ( 109 )   29 - 37   1996.4

高速気流による表面付着微粒子の除去機構 Reviewed

後藤邦彰, 多賀谷実, 増田弘昭

化学工学論文集   21   723 - 731   1995.7

Size Segregation of Polydispersed Particles Caused by Virtical Tapping. Reviewed

YUBUTA Kazuhiro, GOTOH Kuniaki, MASUDA Hiroaki

Journal of the Research Association of Powder Technology, Japan   32 ( 2 )   89 - 96   1995.2

衝突、圧縮、粉砕に伴う三酸化二アンチモン粒子の性状変化 Reviewed

福井国博, 松崎智昭, 後藤邦彰, 増田弘昭

粉体工学会誌   32   23 - 30   1995.1

The size segregation of polydispersed particles during feeding into a vessel Reviewed

GOTOH K.

Journal of the Society of Powder Technology,Japan   31 ( 12 )   842 - 849   1994.12

表面付着微粒子の高効率除去法に関する検討 Reviewed

後藤邦彰, 苅部建太, 増田弘昭, 馬場美二

粉体工学会誌   31   726 - 733   1994.10

高速気流による微粒子の除去効率に対する表面材質の影響 Reviewed

後藤邦彰, 武部彰二, 増田弘昭

化学工学論文集   20 ( 5 )   685 - 692   1994.9

Effect of Particle Diameter on Removal of Surface Particles Using High Speed Air Jet. Reviewed

Gotoh Kuniaki, Kida Minoru, Masuda Hiroaki

Chemical engineering   20 ( 5 )   693 - 700   1994.9

Improvement of the Mixer-type Disperser Reviewed

K GOTOH, T YOSHIDA, H MASUDA

ADVANCED POWDER TECHNOLOGY   5 ( 4 )   323 - 337   1994.8

Effect of the Impeller Shape on the Performance of the Mixer-type Disperser Reviewed

K.Gotoh, H.Asaoka, H.Masuda

Advanced Powder Technology   5   353 - 364   1994.8

高速気流による表面付着微粒子の除去効率に及ぼす湿度の影響 Reviewed

後藤邦彰, 武部彰二, 増田弘昭

化学工学論文集   20   205 - 212   1994.3

種々の粉体における接触電位差の測定と評価 Reviewed

増田弘昭, 板倉隆行, 後藤邦彰, 高橋徹, 手嶋孝

粉体工学会誌   30 ( 12 )   854 - 859   1993.12

エアロゾル粒子の帯電量分布測定 Reviewed

増田弘昭, 後藤邦彰, 折田伸昭

エアロゾル研究   8   325 - 332   1993.12

乾式分散機の性能評価 Reviewed

増田弘昭, 後藤邦彰

粉体工学会誌   30 ( 10 )   703 - 708   1993.10

高速気流による壁面付着微粒子の除去 Reviewed

増田弘昭, 後藤邦彰, 深田公司, 馬場美二

粉体工学会誌   30 ( 1 )   24 - 31   1993.1

高速回転翼型分散機の分散機構に関する検討 Reviewed

後藤邦彰, 高橋通泰, 増田弘昭

粉体工学会誌   29 ( 1 )   11 - 17   1992.1

気中撹拌型微粒子分散機の分散性能に対する粉体供給流量およびインペラー回転数の影響 Reviewed

増田弘昭, 川口哲司, 後藤邦彰

粉体工学会誌   27 ( 8 )   515 - 519   1990.8

Effect of Acceleration Distance on the Classification Performance of Improved Rectangular Jet Virtual Impactor Reviewed

GOTOH Kuniaki, MIYAWAKI Sachiko, MASUDA Hiroaki

Earozoru Kenkyu   3 ( 3 )   212 - 220   1988.8

粉粒体／多孔体材料の計測とデータの解釈／使い方

後藤邦彰（ Role： Sole author ,  [3]粉体ハンドリングに必要な測定・評価方法）

S&T出版  2015.6 

Particle Adhesion and Removal

（ Role： Sole author ,  7.High Speed Air Jet Removal of Particles from Solid Surfaces）

2015.1 

粉体・ナノ粒子の創成と製造・処理技術＝基礎物性からプロセス設計の実務・トラブル処理まで＝

後藤邦彰（ Role： Sole author ,  第1章 粉体・ナノ粒子の機能性とその利用 第1節 粉体であることの優位性とその応用）

テクノシステム  2014.11 

粉体工学ハンドブック

後藤邦彰（ Role： Sole author ,  2.21偏析、3.6.1気中分散）

朝倉書店  2014.2 

粉・粒体の構造制御、表面処理とプロセス設計

後藤邦彰（ Role： Sole author ,  第4章 微粒子、粉体表面の分析、構造解析 第10節 粉体の流動性評価）

技術情報協会  2013.9 

ものづくり高品位化のための微粒子技術

後藤邦彰（ Role： Sole author ,  第５章微粒子をハンドリングする）

大河出版  2012.12 

初歩から学ぶ粉体技術

後藤邦彰（ Role： Sole author ,  第7章分散 7-1.気中における粒子分散）

森北出版  2011.12 

超微粒子の分散技術とその評価

後藤邦彰（ Role： Sole author ,  第３章 気中における粒子の付着・帯電メカニズムと分散技術 第１節気中における粒子の付着メカニズム、第３節気中における微粒子分散技術）

サイエンス＆テクノロジー  2009.2 

Nanoparticle Technology Handbook ed. M.Hosokawa, K.Nogi, M.Naito and T.Yokoyama

Kuniaki Gotoh（ Role： Sole author ,  3.2.1 Single particle motion）

2007.11 

Developments in Surface Contamination and Cleanning Fundamentals and Applied Aspects Ed. R.Kohli and K.L.Mittal

Kuniaki Gotoh（ Role： Sole author ,  17 Cleaning using a High-speed Air Jet）

2007.11 

Particles on Surfaces 9

Removal of micrometer-size particles from solid, surfaces by an impinging air jet（ Role： Sole author）

2006.8 

ナノパーティクルテクノロジーハンドブック

後藤邦彰（ Role： Sole author ,  3.2.1単一粒子の運動）

日刊工業新聞社  2006.4 

粉体工学叢書 第３巻 気相中の粒子分散・分級・分離操作

大谷吉生, 後藤邦彰, 山田昌治, 吉田英人（ Role： Joint author ,  P.12-P.34, P.73-P.91）

日刊工業新聞社  2006.3 

Powder Technology Handbook 3rd ed

K.Gotoh（ Role： Sole author ,  2.6 Adhesive Force of Single Particle, 4.5.1 Particle Dispersion in Gaseous State, 5.2.1 Basis of Classification, 5.20.1 Fluidized Beds）

CRC Press  2006.1 

エアロゾル用語集

後藤邦彰（ Role： Sole author ,  ４.動力学「気体と微粒子の相互作用」「慣性運動・沈降」,１４.プロセシング「分級・空気分級」「気中分散」）

京都大学学術出版会  2004.8 

微粒子工学体系 第I巻基本技術

後藤邦彰（ Role： Sole author ,  第2章 7-2流れ場における 粒子運動 第3章 4-2気中における分散 第7章 1-2気中分散）

フジテクノシステムズ  2001.10 

粉体工学用語辞典 第２版

（ Role： Sole author）

日刊工業新聞社  2000.3 

粉体工学便覧

後藤邦彰, 遠藤偵行（ Role： Joint author ,  IV章 粉粒体を扱う単位操作，３．分散，３.１気中分散）

日刊工業新聞社  1998.3 

Powder Technology Handbook 2nd ed

H.Masuda, Kuniaki Gotoh（ Role： Joint author ,  Adhesive Force of Single Particle）

1997.8 

第6章粒子集合体の力学的特性測定法の基礎と実際－粒子集合体の力学的特性測定法の概論－ Invited

後藤邦彰

化学装置   44 - 51   2020.6

新・粉体工学基礎講座 第1章粒子の性質と測定 1.11粒子の凝集・分散・分散安定化 1.11.1 粒子の凝集・分散・分散安定化の概要，1.11.2 粒子の凝集, 1.11.3 凝集粒子の分離・分散

後藤邦彰, 飯島志行

粉体工学会誌   57 ( 6 )   332 - 337   2020.6

粉体技術者のための粉体入門講座 入門の予習編 第２章－１～１２ Invited

後藤邦彰

粉体技術   10 ( 3 )   2018.3

Powder characteristics for index of powder unit operation

Journal of the Taiwan Institute of Chemical Engineers   90   1 - 5   2018

Consideration on a Powder Characteristic for Index of Powder Unit Operation Performance

53 ( 6 )   396 - 401   2016.6

粒子分散技術と粉体の付着性に関する一考察 Invited

後藤邦彰

粉砕   58   51 - 59   2016.1

一軸圧縮成形体・充填に対する一考察－単成分での粒子径の影響と微粒子添加による充填率向上－ Invited

後藤邦彰, 吉田幹生

Pharm Tech Japan   31 ( 16 )   103 - 110   2015.12

The influence of starting materials on the color tone of cobalt blue pigment

53   45 - 48   2015.9

高速エアジェットによる固体表面からの粒子除去 Invited

後藤邦彰

エアロゾル研究   29 ( 4 )   229 - 235   2014.12

Characteristics for Powder Handling : Adhesion, Resuspension and Dustiness Invited

78 ( 3 )   171 - 174   2014.3

粉体技術者のための粉体入門講座 入門の予習編－１～１２，第２章－１～１２ Invited

後藤邦彰

粉体技術   2014.1

Dustiness testing of manufactured nanomaterials

Isamu Ogura, Atsuo Kishimoto, Hiromu Sakurai, Masashi Gamo, Mari Kotake, Kuniaki Gotoh

29TH SYMPOSIUM ON AEROSOL SCIENCE AND TECHNOLOGY, 2012   231 - 232   2012

エアジェットによる固体表面からの微粒子除去 Invited

後藤邦彰

空気清浄   47 ( 5 )   23 - 30   2010.1

Fundamentals on Aerosol Nanoparticle Dispersion, Deposition and Agglomeration and their Evaluation

OKUYAMA Kikuo, ISKANDAR Ferry, GOTOH Kuniaki

Journal of the Society of Powder Technology,Japan   47 ( 10 )   722 - 738   2010

粉体付着特性測定とその単位操作への適用 Invited

後藤 邦彰

Ｍ＆Ｅ   163 - 165   2008

粒子の付着力と付着性－付着力と分離力のバランスから考える粉体粒子の付着現象－ Invited

後藤邦彰

クリーンテクノロジー   ( 6 )   46 - 50   2008

Control of Apparent Specific Gravity in Binary Particle Systems of Gas-Solid Fluidized Bed Invited

Mikio Yoshida, Jun Oshitani, Keiko Ono, Miki Ishizashi, Kuniaki Gotoh

KONA POWDER AND PARTICLE JOURNAL   26   227 - 237   2008

粉体の付着力と付着性 Invited

後藤邦彰

日刊工業新聞   2007.10

Application of Penetration Method to Evaluation of Non-uniformity of Particle Bed Structure Invited

Kuniaki Gotoh, Tatsuo Daikoku, Tatsuo Nishimura

KONA-POWDER AND PARTICLE   25 ( 25 )   280 - 288   2007

Fluidized Bed Medium Separation (FBMS) of Mortar and Gravel for Recycle of Waste Concrete

YOSHIDA Mikio, OSHITANI Jun, OKUDA Kazuyuki, OHISHI Hiroyuki, GOTOH Kuniaki

Journal of the Society of Powder Technology,Japan   43 ( 4 )   260 - 269   2006.4

Measurement of Resuspension Fraction of Deposited Particles Using A Piezoelectric Sensor Reviewed

GOTOH Kuniaki, HOLLANDER Werner

14   192 - 194   1997.8

表面付着微粒子の高効率除去法－高速気流（エアー・ジェット）噴射法の基礎とその応用－ Invited

後藤邦彰, 増田弘昭

クリーンテクノロジー   46 - 49   1996.1

バーチャル・インパクターによる高精度分級の可能性 Invited

後藤邦彰, 増田弘昭

粉体と工業   24 ( 5 )   42 - 51   1992.5

Evaluation of Local Powder Flowability Induced by Gravity

Fundamentals of Particle Removal by High Speed Air Jet and Enhancement Methods of the Removal Performance Invited International conference

Kuniaki Gotoh

2016 Material Research Society Spring Meeting & Exhibits  2016  Material Reseacrh Society

Influence of Raw Materials on Color Tone of Cobalt Blue Pigment

DEM Simulation Analysis for Effects of Adhesive Forces of Admixed Particles on Compressed Packing Fractions in a Particle Bed

A fundamental investigation for evaluation of a filler distribution in a composite material using ultrasonic properties

Characteristics and Mechanism of Particle Release During Opening of a Vessel Containing Nanomaterials International conference

Moyuru Okano, Mikio Yoshida, Jun Oshitani, Kuniaki Gotoh, Isamu Ogura

9th Asian Aerosol Conference  2015 

Release characteristics of single-wall carbon nanotubes during manufacturing and handling

I. Ogura, M. Kotake, N. Hashimoto, K. Gotoh, A. Kishimoto

NANOSAFE 2012: INTERNATIONAL CONFERENCES ON SAFE PRODUCTION AND USE OF NANOMATERIALS  2013  IOP PUBLISHING LTD

Effect of Diameter and Coverage Ratio of Admixed Particle on Packing Fraction in Particle-Bed

Effect of Particle Size on Packing Fraction Obtained by Dry Compaction of Powders Having Sizes in the Range from Micron to Nano-meter

Evaluattion of Adhesion Characteristics under High Temperature Condition by Air Penetration Method

Kuniaki GOTOH, Hideori Shinohara, Mikio Yoshida, Jun Oshitani

The Third Asian Particle Technology Symposium  2007 

Development of industrial scale high performance separation system for removal of Cl-containing plastics from waste plastics by using gas-solid fluidized bed

Evaluation of Particle Adhesion Characteristics Based on Fluid Penetration Method

Fluidized Bed Medium Separation (FBMS) of Shredder Residue of Electric Appliance Waste

Oshitani, J, Kaname, K, Gotoh, K

Change of Pressure Drop of Particle Suspension Flow by a Flocculant

Reduction of Pressure Drop of Solid-liquid Multiphase Flow by a Flocculant

*Kuniaki GOTOH, Shinichi MORIYAMA, Tatsuo Nishimura

The 2nd Asian Particle Technology Symposium, 2003  2003 

Effect of neighbor particle on resuspension fraction from sparse particle bed

2002 

Effect of Number Density of Deposited Particles on Resuspension Fraction from Sparse Particle Bed

2001 

The Effect of Particle Size on the Reverse Combustion in a Packed Bed

2001 

Particle Separation in Suspension of Neutrally Buoyant Particles and Liquid by Thermal Convection

Nishimura,T., Jyono,M.,*Gotoh,K. and Kunitsugu,K.

JSME/KSME Thermal Engineering Conf.  2000 

Effect of Nozzle Shape and Operating Conditions on Resuspension of Single Particles by an Impinging Air Jet

Gotoh,K. Aoe,K, Nishimura,T

J.Aerosol Sci.p.p.S837-S838  2000 

Velocity Measurements of Double-Diffusive Convection During Unidirectional Binary Solidification

Tatsuo NISHIMURA, Makoto SASAKI, Kuniaki GOTOH

2nd Pacific Symposium on Flow Visualization and Image Processing  1999 

Enhancement of Removal Efficiency of Deposited Single Particles by a High Speed Air Jet

Gotoh,K, Masuda,H

J.Aerosol Sci., vol.29, Suppl.1, p.p.S1231-S1232 

The Structure of The Diffusive Interface in a Salt-stratified Two-layer System Under a Horizontal Temperature Gradient

Nishimura,T, Sakura,S, Sejima,T, Gotoh,K

8th International Symposium on Flow Visualization 

Mass Transfer Between Double-diffusive Layers Under a Horizontal Temperature Gradient

Nishimura,T, Sakura,S, Ogata,Y, Gotoh,K

11th International Heat Transfer Conf., Kyongju 

Experimental study of Resuspension of Deposited Single Particles Using a Piezoelectric Sensor

Gotoh,K, Hollaender,W

J. Aerosol Sci. vol.28, Suppl.1,p.p.S497-S498 

Morphological Change of hardened Oil Particles Induced by Impaction Against a Wall

Fukui,K, Masuda,H, Gotoh,K, Suzuki,M

14th annual meeting of AAAR 

New Removal Methods of Deposited Particles from a Solid Surface

Gotoh,K, Masuda,H

14th annual meeting of AAAR 

Removal of Particles Deposited on the Surface Using high-speed Air Jet

Masuda,H, Gotoh,K

4th International Aerosol Conf. 

Fine Particle Size Classification by a Virtual Impactor

Gotoh,K, H.Masuda

Third International Aerosol Conf.,Kyoto 

音波による表面付着微粒子の分離促進機構

Grant number：07750831  1995

日本学術振興会  科学研究費助成事業  奨励研究(A)

後藤 邦彰

Chemical Equipment Design and Drawing （2024academic year） Third semester  - 木5～8

Chemical Equipment Design and Drawing 1 （2024academic year） Third semester  - 木5～6

Chemical Equipment Design and Drawing 2 （2024academic year） Third semester  - 木7～8

Industrial Materials 1 （2024academic year） 3rd and 4th semester  - 木3～4

Seminar on Applied Chemistry 1 （2024academic year） Prophase  - その他

Seminar on Applied Chemistry 2 （2024academic year） Late  - その他

Research Works for Master Thesis on Applied Chemistry （2024academic year） Year-round  - その他

Seminar in Advanced Chemistry （2024academic year） Other  - その他

Thermal Energy Systems Engineering （2024academic year） Prophase  - その他

Thermal and Energy Process Engineering （2024academic year） Prophase  - その他

Analysis and Application of Heat and MassTransport Phenomena （2024academic year） Prophase  - その他

Advanced Study （2024academic year） Other  - その他

Seminar in Fluid and Particle Process Engineering （2024academic year） Year-round  - その他

Particle-Fluid Engineering （2024academic year） Prophase  - その他

Design of Chemical Process I （2023academic year） Third semester  - 木5～8

Leading-edge Technology in Materials and Process Innovation 2 （2023academic year） Summer concentration  - その他

Basic Chemistry （2023academic year） Second semester  - 火3～4,金1～2

Basic Chemistry （2023academic year） Second semester  - 火3～4,金1～2

Basic Chemistry （2023academic year） Second semester  - 火3～4,金1～2

Chemical Equipment Design and Drawing （2023academic year） Third semester  - 木5～8

Chemical Equipment Design and Drawing （2023academic year） Third semester  - 木5～8

Chemical Equipment Design and Drawing 1 （2023academic year） Third semester  - 木5～6

Chemical Equipment Design and Drawing 2 （2023academic year） Third semester  - 木7～8

Industrial Materials 1 （2023academic year） 3rd and 4th semester  - 木3～4

Seminar on Applied Chemistry 1 （2023academic year） Prophase  - その他

Seminar on Applied Chemistry 2 （2023academic year） Late  - その他

Research Works for Master Thesis on Applied Chemistry （2023academic year） Year-round  - その他

Seminar in Advanced Chemistry （2023academic year） Other  - その他

Topics in Material Process 2 （2023academic year） Summer concentration  - その他

Advanced Materials Chemistry 2 （2023academic year） Summer concentration  - その他

Thermal Energy Systems Engineering （2023academic year） Prophase  - その他

Thermal and Energy Process Engineering （2023academic year） Prophase  - その他

Analysis and Application of Heat and MassTransport Phenomena （2023academic year） Prophase  - その他

Advanced Study （2023academic year） Other  - その他

Advance in Particle Characteristics （2023academic year） Prophase  - その他

Seminar in Fluid and Particle Process Engineering （2023academic year） Year-round  - その他

Seminar in Fluid and Particle Process Engineering （2023academic year） Year-round  - その他

Particle-Fluid Engineering （2023academic year） Prophase  - その他

Chemical Process Engineering （2022academic year） Fourth semester  - 火5～6

Chemical Process Engineering （2022academic year） Fourth semester  - 火5～6

Basic Chemistry （2022academic year） Second semester  - 火3～4,金1～2

Basic Chemistry （2022academic year） Second semester  - 火3～4,金1～2

Basic Chemistry （2022academic year） Second semester  - 火3～4,金1～2

Chemical Equipment Design and Drawing （2022academic year） 1st and 2nd semester  - 金5～8

Chemical Equipment Design and Drawing 1 （2022academic year） 1st semester  - 金5～8

Chemical Equipment Design and Drawing 2 （2022academic year） Second semester  - 金5～8

Internship in Applied Chemistry （2022academic year） Prophase  - その他

Industrial Materials 1 （2022academic year） 3rd and 4th semester  - 木3～4

Seminar on Applied Chemistry 1 （2022academic year） Prophase  - その他

Seminar on Applied Chemistry 2 （2022academic year） Late  - その他

Basic Applied Chemistry （2022academic year） Late  - 月3～4,火3～4

Research Works for Master Thesis on Applied Chemistry （2022academic year） Year-round  - その他

Topics in Material Process 2 （2022academic year） Summer concentration  - その他

Advanced Materials Chemistry 6 （2022academic year） Summer concentration  - その他2～8

Advance in Particle Characteristics （2022academic year） Prophase  - その他

Seminar in Fluid and Particle Process Engineering （2022academic year） Year-round  - その他

Particle-Fluid Engineering （2022academic year） Prophase  - 水1,水2

Chemical Process Engineering （2021academic year） Fourth semester  - 火5,火6

Chemical Process Engineering （2021academic year） Fourth semester  - 火5,火6

Basic Chemistry （2021academic year） Second semester  - 火3,火4,金1,金2

Basic Chemistry （2021academic year） Second semester  - 火3～4,金1～2

Basic Chemistry （2021academic year） Second semester  - 火3,火4,金1,金2

Chemical Equipment Design and Drawing （2021academic year） 1st and 2nd semester  - 金5,金6,金7,金8

Chemical Equipment Design and Drawing 1 （2021academic year） 1st semester  - 金5,金6,金7,金8

Chemical Equipment Design and Drawing 2 （2021academic year） Second semester  - 金5,金6,金7,金8

Internship in Applied Chemistry （2021academic year） Prophase  - その他

Seminar on Applied Chemistry 1 （2021academic year） Prophase  - その他

Seminar on Applied Chemistry 2 （2021academic year） Late  - その他

Research Works for Master Thesis on Applied Chemistry （2021academic year） Year-round  - その他

Topics in Material Process 2 （2021academic year） Summer concentration  - その他

Physical Chemistry and Exercises 2 （2021academic year） Third semester  - 月3,月4,木3,木4

Physical Chemistry 2 （2021academic year） Third semester  - 月3,月4,木3,木4

Advance in Particle Characteristics （2021academic year） Prophase  - その他

Seminar in Fluid and Particle Process Engineering （2021academic year） Year-round  - その他

Particle-Fluid Engineering （2021academic year） Prophase  - 水1,水2

Chemical Process Engineering （2020academic year） Fourth semester  - 火5,火6

Chemical Process Engineering （2020academic year） Fourth semester  - 火5,火6

Chemical Equipment Design and Drawing （2020academic year） 1st and 2nd semester  - 金5,金6,金7,金8

Chemical Equipment Design and Drawing 1 （2020academic year） 1st semester  - 金5,金6,金7,金8

Chemical Equipment Design and Drawing 2 （2020academic year） Second semester  - 金5,金6,金7,金8

Internship in Applied Chemistry （2020academic year） Prophase  - その他

Seminar on Applied Chemistry 1 （2020academic year） Prophase  - その他

Seminar on Applied Chemistry 2 （2020academic year） Late  - その他

Basic Applied Chemistry （2020academic year） Late  - 月3～4,火3～4

Research Works for Master Thesis on Applied Chemistry （2020academic year） Year-round  - その他

Topics in Material Process 4 （2020academic year） Summer concentration  - その他

Topics in Material Process 2 （2020academic year） Summer concentration  - その他

Advanced Materials Chemistry 8 （2020academic year） Summer concentration  - その他

Physical Chemistry and Exercises 2 （2020academic year） Third semester  - 月3,月4,木3,木4

Physical Chemistry 2 （2020academic year） Third semester  - 月3,月4,木3,木4

Advanced Synthetic Chemistry 8 （2020academic year） Summer concentration  - その他

Advance in Particle Characteristics （2020academic year） Prophase  - その他

Seminar in Fluid and Particle Process Engineering （2020academic year） Year-round  - その他

Particle-Fluid Engineering （2020academic year） Prophase  - 水1,水2